Mark of Business ID Card Hologram Overlay with UV Eagle
|Buy 10 for $2.99 Each|
|Buy 25 for $2.39 Each|
|Buy 50 for $1.99 Each|
|Buy 100 for $1.49 Each|
Secure your business with the unique multi-spectrum Mark of Business ID card hologram! The hologram contains four seals, staggered, two on the bottom. Each seal has sailboats in the center. The text at the top of the seal reads "The Official Seal". The text at the bottom of the seal reads "The Mark of Business Trust". As the card is shifted, the different layers of the multi-specturm shift in color and intensity until the seals disappear completely.
The picture shown is an artist interpretation of the hologram showing only the "flat" content on the hologram. The hologram plays with light beautifully and is a fantastic security measure for your IDs. Each hologram is peel and stick and is applied manually. Hologram overlays are ideal for enhancing the security of your card and increase the durability of the card surface.Ultra-Violet Black Light Ink: This hologram overlay includes the shape of an eagle centered on the card invisible to the naked eye. This eagle is only visible under an ultra-violet black light. When viewed underneath the black light the eagle glows bright yellow. This method ensures a high-level of security as this security device can hardly be seen with the naked eye. Any security personnel can check for the black light ink and verify authenticity. Since this security-device is hidden, it often is overlooked by would-be document forgers providing you with an added layer of authentication. In heightened security environments we highly-recommend including this feature for your ID cards and security documents.
Full Coverage: We manufacture all of our holograms to measure a full 52mm X 84mm to fit all PVC ID cards as well as our butterfly pouches perfectly. All of our ID overlays are measure 52mm X 84 mm and are slightly larger than other ID Card holograms sold on the market which are CR 79 sized (83mm X 51 mm). This gives you more full coverage of the surface of the ID card, while still giving the necessary room to position the overlay on the surface.
Thinner is Better: This hologram is only 1.5 mil (0.0015") thick, compared to the old 5 mil (0.005") thick version of this Shield and Key hologram. Our holograms are made of a durable, ultraclear polyester film which allow them to be strong, while only needing to be 1.5 mil thick. This means they go on smoother and are much less noticeable.
Self-destructing: The holograms use a tamper-evident underlay which self-destructs if the hologram is removed or if an attempt is made to alter the content underneath the hologram.